 |
 |
|
|
 |
|
|
|
|
|
|
|
|
| With using LINK10, you can monitor several
extruders operation through intranet, and laborsaving
of a quality control and automation of production
control are realized. Communication with up
to 10 (ten) sets of extrusion machines is enabled
via Ethernet LAN by equipping an EXANET controller
with a network interface card (option). |
|
|
|
|
|
|
•Observation and
Control for Multi-Production Lines |
|
|
|
 |
|
|
|
| Data Logging |
: |
C S V form |
| Remote console |
: |
Same data as EXANET panel can
be displayed on a remote personal computer |
| Operation conditions |
: |
The preservation and read-out
alarm transmission to upload, download and HDD |
| Transmitting Alarm |
: |
Alarm message to be transmitted
to the (strikethrough : appointed) mail address
assigned |
| |
|
—message
example—“abnormal condition occurred
in No.1 TEX” |
|
|
|
|
|
|
|
|
|
|
|
|
“i-TEX”
comes standard with the EXANET computer aided
control system originally developed by JSW.
With having newest 64bitCPU, high-speed and
highly precise operation control is realized. |
 |
 |
|
|
|
|
|
|
•Preventive Maintenance
for failure/abnormal operation |
|
|
|
| |
|
Sensors provided
in the machine are useful to monitor the operating
condition and prevent big damage in advance.
|
|
|
|
|
|
|
•Flexible Control
System for a wide variety of Compounding Process |
|
|
|
| |
|
Communication
control system operation part is independent
of operation panel and installed at extruder
side, operation and workability improved. |
|
|
|
|
|
|
•Maintenance Message |
|
|
|
| |
|
Exact preventive
maintenance can be achieved, notifying proper
maintenance timing in advance. |
|
|
|
|
|
|
•Operation Guide
and Advice |
|
|
|
| |
|
Advise of trouble
shooting : Dialogue form advice can be expected
through EXANET panel such as vent up, feed neck. |
|
|
|
|
|
|
|
|
|
|
|
|
JSW's “Technology
Development Center” for polymer processing
is one of the world's leading plastics processing
research facilities.
The Extrusion Division at the Center has more
than 10 extruders installed to perform a wide
variety of tests for product development. |
|
|
|
|
|
|
•Screw configuration
management software TEX-GEO (Option) |
|
|
|
| |
|
JSW originally
developed screw geometry management software
TEX-GEO can design and maintain screw configuration
as database.
It is possible to edit, save and print screw
configuration in computerized style which was
being created in handwriting until now.
GEO:Geometry |
|
|
|
|
|
|
•FAN method simulation
software TEX-FAN (Option) |
|
|
| |
| |
|
JSW originally
developed FAN (Flow Analysis Network) method
software (TEX-FAN) can analyses the important
factors, such as polymer pressure and temperature
profile, fullness, residence time, and solid
ratio in a short term. It is effective in the
prediction of quality control and speed-up of
material development using this software. |
|
