

We deal with medium & large sized blow molding machine for PFT (plastic fuel tank for automobile and motorcycle) , spoiler for automobile, container etc.
We have a variety of delivery results and get a high evaluation in response to the demand of the customers.
Overview
Overview of the blow molding machine
Blow molding is a molding method in which a resin called a parison, which is a pipe made of a molten thermoplastic resin, is blown out and blown out to take out after cooling.Conventionally, it was used to manufacture bottle containers for eye drops, medicines, cosmetics, foods, detergents, etc. Recently, its features such as cost performance, high rigidity and light weight have been evaluated, and various types of products, mainly automobile parts, have been evaluated. Application fields are also expanding to industrial parts.
Flows in Blow Molding
Heat melting of thermoplastic resin

Molding of parison

Expansion in a closed mold by compressed gas

Cooling

Removal of molded product

Main Component I: Exturder
- In order to obtain a good-quality molded product, a good parison must first be formed. The most important factor affecting this is the extruder.
- The main components are a cylinder, screw, hopper, speed reducer, drive motor, and heating / cooling section.

Main Component II: Cross-head
A device that forms a parison by accumulating a necessary amount of resin melted in an extruder for each molding shot and extruding it at high speed with a piston.

Main Component III: Clamping Unit
- A device for molding a product by sandwiching and blowing the parison between the molds.
- The molding machine consists of a machine platform, mold clamping synchronizer device, adjusting base device, takeoff device (OP), lower prepinch device (OP), expanding device (OP), safety door, stroke detection device, and moving rail.

The history of blow molding machine of JSW
Since the delivery of the first machine in 1962, our company has been continuously researching and developing, and has gained many deliveries and abundant experience both in Japan and overseas. JSW's blow molding machines always respond to the needs of a wide range of customers including the bottle industry and the automobile industry with the latest technology.
- 拡大
- Delivered the first machine in 1962
- 拡大
- Delivered 3 types 5 layers PFT blow molding machine in 1989
- 拡大
- Launched 4 types 6 layers PFT blow molding machine in 1998
Features of JSW blow molding machine
- We have a lineup that can meet various needs from bottles of several cc to tanks of 1000 liter class.
* In 2006, small blow molding machines were integrated into Tahara Machinery Ltd. - We will achieve the quality that meets your requirements by enhancing our test equipment.
- We have a wealth of achievements in special molding such as multi-piece molding and multilayer molding.