Ultra Large Injection Molding Machine toggle type

Main targets are large size automobile parts and transportation pallet, This toggle clamping unit machine which we have many experiences and achieve to run high productivity, energy saving and molding stability. It can be used for large size mold, thin walled product and faster cycle time molding.

Guidance & Specifications Downloads

Features

  1. Newly developed multi axis synchronous control system of large capacity servo motor is used for clamping and injection unit
  2. High speed output injection unit for stabilize molding and large size product
    (Injection speed is 45% faster than previous hydraulic machine)
  3. High plasticization rate for cycle time reduction (25% higher than previous hydraulic machine)
  4. high speed mold open and close for cycle time reduction (40% higher than previous hydraulic machine)
  5. Wide platen for large size mold
  6. SYSCOM 3000 controller with 15 inch screen
  7. High speed servo control circuit for precision molding
  8. Energy saving by electric machine
  9. various composit operation for cycle time reduction
  10. Clamping force monitoring and feedback device <standard specification>
  11. Compression mode that enables low pressure molding, high mold transferavility <standard specification>
  12. High rigidity clamping unit "Flat Press Platen" which exerts a clamping force evenly distributed over the mold surface

J2500AD Specification

Item J2500AD
Clamping force kN 24600
Opening stroke mm 1800
Mold hight mm 900~1700
Tie bar distance(H×V) mm 2050×1770
Injection Unit   7500H 9500H 15000H
Screw Diameter mm 120 130 130 140 150 160 170
Theoretical Injection capasity cm3 7464 8760 9490 11007 14579 16588 18726
Injection pressure MPa 180 153 180 155 180 158 140
Injection Rate cm3/s 1470 1726 1726 2001 2297 2614 2951
Plasticizing Rate kg/h 700 730 850 880 1080 1110 1150
Machine Dimensions
(L×W×H)
m 16.1×4.5×3.8 16.3×4.5×3.8 17.3×4.5×3.8

J3000AD Specification

Item J2500AD
Clamping force kN 24600
Opening stroke mm 1800
Mold hight mm 900~1700
Tie bar distance(H×V) mm 2050×1770
Injection Unit   7500H 9500H 15000H
Screw Diameter mm 120 130 130 140 150 160 170
Theoretical Injection capasity cm3 7464 8760 9490 11007 14579 16588 18726
Injection pressure MPa 180 153 180 155 180 158 140
Injection Rate cm3/s 1470 1726 1726 2001 2297 2614 2951
Plasticizing Rate kg/h 700 730 850 880 1080 1110 1150
Machine Dimensions
(L×W×H)
m 16.1×4.5×3.8 16.3×4.5×3.8 17.3×4.5×3.8