No.11-17
You can read our technical journals here.
If you need the articles in the back numbers,
please feel free to ask us through our contact form.
© The Japan Steel Works, Ltd., All rights reserved.
| No.11 (1975) | |
| Title | Author |
| Experimental Study on Solid Conveying in the Plasticating Extruder | Mitsuaki Mizoguchi, Hiroshima Plant |
| Control of Molecular Weight and Molecular Weight Distribution of High Density Polyethylene | Tadamoto Sakai, Hiroshima Plant |
| A Study on Commercial Frequency Induction Heating Equipment | Masao Nagahara & Nobuyuki Harada, Hiroshima Plant |
| No.12 (1976) | |
| Title | Author |
| Challenge to Manufacture of Large Forgings from 500 Metric Ton Steel Ingots | Saburo Kawaguchi, Yoshitaka Nakagawa, Juro Watanabe, Shoichi Shikano, Kenji Maeda, Noritaka Kanno, Muroran Plant |
| Manufacture of the Low Pressure Turbine Rotor Forgings with High Strength and Good Toughness | Susumu Sawada, Akira Tokuda, Ryosuke Homma, Tateo Jin, Muroran Plant |
| Manufacture of Large Nozzle Belt Forging for 1200 MWE Pressurized Water Reactor Pressure Vessels | Werner Debray, Host Cerjak, Kraftwerk Union Erlangen, Shinsaku Onodera, Hisashi Tsukada, Komei Suzuki, JSW Muroran Plant |
| No.13 (1977) | |
| Title | Author |
| Application of Cold-setting Moulds and Cores to Large Steel Castings | Koreaki Suzuki Dr. Eng., Shinichi Nakada |
| Studies on Improving the Internal Soundness of Large Steel Castings | Koreaki Suzuki Dr. Eng., Shinichi Nakada, Takehiro Miyamoto |
| Gigantic Plate Mill Housings, the Largest Steel Castings in the World | Yoshitaka Nakagawa Dr. Sc., Masayoshi Nuijima, Fumio Hirayama |
| Manufacture of Francis Type Hydraulic Turbine and Pump Runners | Noboru Hiraoka Dr. Eng., Koichi Watanabe, Takehiro Miyamoto, Shigeru Jin |
| Manufacturing Techniques and Materials of Turbine Cylinder Casings | Keiji Kobayashi, Mineo Tsuchihara, Masaki Murata |
| No.14 (1990) | |
| Title | Author |
| Mixing Mechanisms in Polymer Processing | ZEHEV TADMOR Department of Chemical Engineering Technion - Israel Institute of Technology |
| Mold Flow Simulation using PDC-CAE system | Minoru Yoshida, Tadao Egi and Kenji Kasugai / Injection Moulding Machine R&D Sect., Hiroshima Plant |
| Design of Injection Mold for Plastic Bonded Magnet using FEM Magnetic Field Analysis | Akira Morii, Masashi Kato and Kenji Kasugai / Injection Moulding Machine R&D Sect., Hiroshima Plant |
| Injection Molding of Stainless Steel Powders -Effect of Binder and Powder Characteristics- |
Ritsu Miura, Masahiro Uchida, Yasushi Ohwaki and Hirokazu Madarame Research Division Research Center for Advanced Technologies |
| Reactive Processing using Twin Screw Extruders | Tadamoto Sakai, Dr. / Machinery and Electronic Research Laboratory Mitsuaki Mizoguchi and Hideki Mizuguchi / Design and Engineering Department, Hiroshima Plant |
| Devolatilizing and Dewatering Technology by Twin Screw Extruder "TEX" | Noriaki Hashimoto, Kansaburo Kubota, Kenichi Koike and Tetsuo Mihara / Plastics Machinery Research Group, Hiroshima Plant Katsumi Kataoka / Plastics Machinery Engineering First Group, Hiroshima Plant |
| Progress of Twin Screw Compounding Extruder "TEX" | Norimasa Oda, Jun Kakizaki and Yukio Imamura / Plastics Machinery Research Group, Hiroshima Plant Masanobu Ueda / Plastics Machinery Engineering First Group, Hiroshima Plant |
| Capacity Increase and Energy Saving of Polyolefin Pelletizing Extruders | Hideki Mizugichi and Syunji Ogoshi / Plastic Machinery Engineering First Group Yutaka Mizutani / Electrical Engineering Group, Hiroshima Plant |
| A Study on Quality Improvement of Blow Molded Engineering Plastic Products | Shigeaki Sano / Plastic Machinery Design and Engineering Group, Yokohama Plant |
| Experimental Study on Multilayer Sheet Coextrusion using Feedblock Method | Naotaka Miyauchi, Naoto Saito and Yasuhiro Osada / Plastics Machinery Design and Engineering Group, Yokohama Plant |
| Analysis of Mold Open Characteristics of Injection Molding | Minoru Yoshida, Tadao Egi and Kenji Kasugai / Injection Moulding Machine R&D Sect., Hiroshima Plant |
| On the Influence of Back Flow on the Injection Molding Process | Masatoshi Kaneoka, Tadao Egi and Kenji Kasugai / Injection Moulding Machine R&D Sect., Hiroshima Plant |
| "JIP series" Injection Press Molding Machine | Toshio Nakayama / Third Injection Moulding Machine Engineering Group, Hiroshima Plant |
| Wear and Corrosion Resistant Materials for Plastic Processing Machines | Kenjiro Chikara, Takao Ishido and Toshifumi Yukawa / Productivity Management Group, Hiroshima Plant Yoshitomo Tanaka / Precision Tool Shop, Hiroshima Plant Toru Emi / Machinery Technology Center, Machinery and Electronic Research Laboratory Hajime Esaka / Injection Moulding Machine R&D Sect., Hiroshima Plant |
| Construction and Application of JSW Language for Process Control (JLPC) | Seiji Kameoka / Machinery and Electronics Research Laboratory Yoshinori Morioka / Electrical Engineering Group, Hiroshima Plant Toshio Inami / Research Center for Advanced Technologies |
| No.15 (1991) | |
| Title | Author |
| Production of Ultra Large Monoblock LP Rotor and Superclean LP Rotor Shaft Forgings | Dr.Hisashi TSUKADA, Yasumi IKEDA, Dr.Yasuhiko TANAKA, Hajime YOSHIDA, and Tsukasa AZUMA |
| Development and Material Characteristics of Forged and Cast Steels for Deep-Sea Offshore Application | Dr.Takeshi FUKUDA, Dr.Tadao IWADATE, Masatoshi NAKAMURA, Masahide SHIMAZAKI, and Osamu TSUMURA |
| Development of Large Integral Forgings for the Nuclear Reactor Vessel and Manufacturing Technology | Dr.Keizo OHNISHI, Dr.Hisashi TSUKADA, Kohichi KUDO, Kohmei SUZUKI, and Ikuo SATO |
| Improvement in the Properties of Work Rolls for Cold Strip Mills by the Double Low Frequency Induction Progressive Hardening Process | Hiroshi GOTOH, Tetsuro NISHIYAMA, Mitsuharu FURUKAWA, Nobuhiko OZAKI and Syuzo OHASHI |
| No.16 (1994) | |
| Title | Author |
| Comparison of Twin Screw Extruders | Dr.Chris RAUWENDAAL Rauwendaal Extrusion Engineering, Inc. |
| Adaptive Holding Pressure Control Based on the Prediction of Polymer Temperature Variation in a Mold Cavity | Kazutoshi YAKEMOTO, Tsukasa SIROGANEYA, Dr.Tadamoto SAKAI, Dr.Zenichiro MAEKAWA, Dr.Hiroyuki HAMADA |
| Development of a JSW Expert System for Injection Molding | Seiji KAMEOKA, Nobuhiro HARAMOTO, Dr.Tadamoto SAKAI, Masatoshi KANEOKA |
| Development of a Distributed Control System for an Injection Molding Machine | Tomoaki KUBOTA, Takeshi YOKOBAYASHI, Kenji YAMADA, Hirotaka YAMAMOTO, Yuuji KAMIGAUCHI, Kuniaki MITSUHIRA |
| Flow Analysis in an Intermeshing Counter-Rotating Twin Screw Extruder | Shinichi NINOMIYA, Yoshio NAKANO, Dr.Toshihisa KAJIWARA, Dr.Kazumori FUNATSU |
| Analysis of the Polymer Behavior in an Intermeshing Co-Rotating Twin Screw Extruder by Observing through the Cylinder Sight Glass | Noriaki HASHIMOTO, Jun KAKIZAKI |
| Development of a Direct Reactive Extrusion and Molding System | Shigeki INOUE, Kazuyuki NAKAMURA, Kouji SHINOBUDANI, Naoyuki MURATA, Dr.Tadamoto SAKAI |
| Blow Molding Machine for Multi-Layer Fuel Tanks | Toshio KAGITANI |
| No.17 (1999) | |
| Title | Author |
| Progress and History of Plastic Processing Technology in Japan | Dr.Tadamoto Sakai |
| High Capacity Extrusion Technology for Large Pelletizing Extruder "CMP-X" | Kazuyuki Nakamura, Fumio Kobayashi, Takeshi Ushio, Nobuhisa Kobayashi, Shinichi Ninomiya |
| Analyzing the Process of Dispersing Carbon Black Masterbatch into Polyethylene with Co-rotating, Intermeshing Twin-screw Extruder | Jun Kakizaki, Kazuyuki Nakamura |
| Development of An Injection Molding Process for Magnesium Alloys | Dr.Ken Saito, Dr.Kengo Takeya, Tadashi Tsukeda, Shunsuke Matsuki |
| Development of Adaptive Process Automatic Control System in Injection Molding | Dr.Kazutoshi Yakemoto, Tsukasa Shiroganeya, Hiroshi Ito, Dr.Tadamoto Sakai |
| Pumping Characteristics of an Intermeshing Co-rotating Twin Screw Extruder | Dr.Ning He Wang, Dr.Tadamoto Sakai, Noriaki Hashimoto |
| Crystallization of a－Si Films by Excimer Laser Annealing Method | Junichi Shida, Shinichi Ishizaka, Naoyuki Kobyashi, Osamu Kato |